When your furnace is not heating, Puyallup Heating & Air Conditioning sends a licensed technician to find the cause, explain your repair options, and fix it. We repair gas and electric furnaces, replace units that are past repairing, and install Carrier furnaces. Call (253) 480-5811 or request service online to get a technician scheduled.

Headquartered in Puyallup | In Business Since 1946 | WA Contractor License #PUYALHC826L7 | Carrier Dealer | 4.7 Stars from 500+ Google Reviews

Equipment tends to break when you least expect it. That's why we offer 24/7 emergency repair services. Life happens, but you can always count on us to be there for you and ready to help.

Gas furnace that is completely rusted through, in need of repairs.

Common Signs of Furnace Problems

Here are some common signs to watch out for that could indicate a furnace problem:

  • Your furnace won’t turn on—or turns on but then shuts off.
  • No air is coming out from the vents when your furnace is on.
  • Cool or lukewarm air is blowing out from the vents.
  • Your carbon monoxide detector is going off.
  • Your furnace is making unusual sounds.
  • There is a concerning smell coming from your furnace.
  • Your home struggles to remain warm.
  • There are hot or cold spots throughout your Puyallup, WA, home.
  • You notice condensation on windows or doors.
  • Your energy bills have been increasing for no known reason.

Not sure what is causing the problem? Call our Puyallup Heating & Air Conditioning professionals. We are happy to evaluate your system and its efficiency.

Your furnace might turn on and off, but that doesn't mean it's operating at optimal efficiency. A struggling furnace costs you money. It's always better to discover problems early on and prevent them from becoming more complex and expensive to repair.

Contact Puyallup Heating & Air Conditioning for Furnace Repair by calling us at (253) 480-5811 or request service online now!

Common Furnace Problems and What Causes Them

Most furnace problems start with one symptom. Find yours below to see what is usually behind it and what to check before you call.

Furnace won't turn on

Start with the thermostat. Make sure it is set to heat and set several degrees above room temperature, and replace the batteries if it has them. Then check that the furnace switch near the unit is on and that the breaker has not tripped. If everything has power and the furnace still does nothing, the cause is usually inside the unit, such as a control board, a safety switch or an ignition component, and it needs a technician.

Furnace blowing cold air

Set the thermostat fan to auto. A fan set to on pushes unheated air through the ducts between heating cycles. If the setting is right, check the filter. A clogged filter can overheat the furnace and trip its safety limit, which leaves the blower running without heat. If a new filter does not fix it, the burners or ignition may not be lighting.

Furnace running but no heat

If the blower runs and the air stays cool, the burners are probably not lighting or are not staying lit. On a gas furnace, common causes are a failed igniter, a dirty flame sensor or a gas supply issue. Do not try to clean or adjust gas components yourself. Call us and describe what you hear and see.

Furnace keeps shutting off

A furnace that starts, runs briefly and shuts down is usually protecting itself. Restricted airflow from a dirty filter or closed vents is one cause. A dirty flame sensor, a venting problem or an overheating limit switch are others. Replace the filter and open every supply and return vent. If it keeps cycling, stop resetting it and call.

Pilot light won't stay lit

On an older furnace with a standing pilot, a pilot that keeps going out can point to a worn thermocouple, a draft or a dirty pilot assembly. Relighting it again and again is not a fix. If you smell gas at any point, leave the house first (see the safety note below).

Rattling, banging or squealing noises

New noises mean something changed. Rattling often points to a loose panel or a worn blower part. A repeated bang when the furnace starts can mean delayed ignition. Squealing usually comes from the blower motor or its bearings. Any of these is worth a technician's look before a small part fails and takes something larger with it.

Burning smell

A light dusty smell the first time you run the furnace in the fall is common, because dust that settled on the heat exchanger and burners burns off. If the smell lasts past the first hour or two, or smells like hot plastic or burning metal, shut the furnace off and call us.

Furnace blower not working

If the burners fire but little or no air comes out of the vents, the blower motor, capacitor or control may have failed. A blower that never starts can also overheat the furnace, so do not keep running it.

Furnace tripping the breaker

A breaker that trips when the furnace starts can mean a failing motor, a wiring problem or a short. Do not keep resetting it. Because Puyallup Heating & Air Conditioning is also a licensed electrical contractor, we can check both the furnace and the circuit that feeds it.

Safety first: gas smell or carbon monoxide alarm

If you smell gas, leave the house and call your gas utility from outside. Do not use switches or phones inside. If a carbon monoxide alarm sounds, get everyone outside and call 911. Do not restart the furnace until it has been inspected.

What to Expect During a Furnace Repair Visit

Tell us when you book what the furnace is doing, when it started, and the make and model on the nameplate. A photo of the nameplate helps if the unit is in a tight space. A licensed technician then inspects the furnace, finds the cause, and explains what needs to be repaired and what your options are.

Call (253) 480-5811 or request service online and we will schedule a technician.

Should You Repair or Replace Your Furnace?

Most furnace problems are worth repairing. A new igniter, flame sensor, blower motor or control board gets many furnaces running again. Replacement becomes the better conversation when several of these are true:

  • The furnace is old and the repairs are coming closer together
  • The repair is large compared with the value of the furnace
  • The technician finds a cracked heat exchanger or another safety problem
  • Your heating bills keep climbing and the home still struggles to stay warm
  • The furnace is no longer reliable on cold days

A cracked heat exchanger can let combustion gases into the air you breathe, which is why it is a safety finding and not a comfort issue. We will show you what we found before you decide. If replacement makes sense, our team can go over new Carrier furnace options.

How to Avoid Furnace Problems

Planned maintenance is the best way to keep your furnace running strong. Schedule a furnace tune-up in the early fall before the cold weather arrives. Be sure to change your HVAC filter according to your owner's manual, more often if you have pets or someone with allergies in your Puyallup, WA, household.

At Puyallup Heating & Air Conditioning, we offer a convenient Preventative Maintenance Agreement to fit your budget and needs. As a maintenance plan member, you'll enjoy discounts on parts and labor, priority service, and other perks. Join today and start saving money right away.

Furnace Repair Questions From Puyallup Homeowners

Do I need a permit to replace my furnace in Puyallup?

Yes. A furnace replacement in the City of Puyallup needs a mechanical permit and an inspection. Issued city permits carry conditions such as a carbon monoxide alarm, a duct test report and an electrical final before the mechanical final. Ask any contractor whether the permit is in the quote. Outside city limits, Pierce County rules apply. Questions go to the City Permit Center at (253) 864-4165.

Is my furnace not heating because of the gas supply or the furnace?

Check another gas appliance, such as the stove or water heater. If it works, the gas supply is likely fine and the problem is in the furnace, so call us. If you smell gas, leave the house and call 911 from outside. Do not restart the furnace.

How can I check that a furnace repair company is licensed in Washington?

Search the company on L&I Verify at lni.wa.gov by name, license number or UBI, and confirm the registration is active. Electrical work, like a furnace circuit, needs a separate electrical contractor license. Our contractor license is WA #PUYALHC826L7: check it on L&I Verify.

What should I ask a technician to show me before I approve a furnace repair?

Ask what failed, and ask to see it. Then ask how it was tested, whether the repair fixes the cause or only the symptom, and what your options are if the furnace is old. A technician who found a real problem can point to it.

Call Our Professionals for Furnace Repair Today

When your furnace in your Puyallup, WA, home has a problem, contact Puyallup Heating & Air Conditioning right away. Our licensed HVAC repair professionals will find the cause and get your heating equipment running again, or talk you through your options. Call (253) 480-5811 or request service online.

 

Contact Puyallup Heating & Air Conditioning for Furnace Repair by calling us at (253) 480-5811 or book online now!

How to Avoid Furnace Problems

Planned maintenance is the best way to keep your furnace running strong. Schedule a tune-up in the early fall before the cold weather arrives. Be sure to change your HVAC filter according to your owner’s manual—more often if you have pets or someone with allergies in your Puyallup, WA, household.

Puyallup HVAC technician leaving branded van outside at residential property.

At Puyallup Heating & Air Conditioning, we offer a convenient Preventative Maintenance Agreement to fit your budget and needs. As a maintenance plan member, you’ll enjoy discounts on parts and labor, priority service, and other perks. Join today and start saving money right away.

Call Our Professionals for Furnace Repair Today

When your furnace in your Puyallup, WA, home has a problem, contact Puyallup Heating & Air Conditioning right away. Our licensed HVAC repair professionals will get your heating equipment operating at peak capacity as soon as possible or offer you another solution. Call us at (253) 480-5811 or request service online.

Need Furnace Repair Service?

Contact the experts at Puyallup Heating & Air Conditioning.

Call us at (253) 480-5811!!